AMI NiteHAWK Technické informace Strana 58

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 87
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 57
Section 3 – Operator Screens
52 21822706
5.5 Auxiliary Audio
Auxiliary Audio allows other music sources (such as
a television audio feed) to be played through the
jukebox audio system. The Auxiliary Audio
screen provides the ability to turn on/off the
Auxiliary Audio option, set the delay time for the
audio to start, and set a custom schedule for day(s)
of the week with multiple start/stop times per day
(if desired).
To disable Auxiliary Audio, touch the circle to the left of Disable Auxiliary Audio Mode and it turns blue.
To enable it, touch the circle next to Enable Auxiliary Audio Mode and it will turn blue.
To set the amount of time that needs to pass before Auxiliary Audio will start, touch the text box next to “Aux Delay”. Touch
Clear on the pop-up numeric keypad to clear the current value. Use the keypad to enter the delay time in seconds, and then
touch Update.
To set up a schedule for Auxiliary Audio, touch the Enable Auxiliary Audio Mode on a Schedule button and then touch
Add New Schedule at the bottom of the screen. This will access a separate screen to set up a customized schedule.
Touch the circle next to either All Day (to allow Auxiliary Audio on all day), or
Timespan (to select a start and end time). If you select Timespan, you can
set up different schedules for different days of the week, or multiple start/stop
times per day. Touch the box next to Start and use
the + and symbols above the time to change the
time as desired. Then touch the circle next to AM or
PM, and touch Update to save your changes. After
setting the start time, touch the box next to End and
complete the same steps to set the end time. Select
the days you want your settings to apply to by
touching the box next to the corresponding day. Selected days will have a check in the box next to
the day. To remove the check, touch the check again. When finished, touch Update.
To set up different start/stop times in one day, or different schedules for different days of the week, touch Add New
Schedule again to set up a new schedule and repeat the steps above.
To save your changes and return to the Service Mode – Main Menu, touch the Save button.
Touch the Cancel button to undo your changes and exit the screen.
Zobrazit stránku 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 86 87

Komentáře k této Příručce

Žádné komentáře